So you decided to replace the front wheel bearing and hub assembly. This one is easy to difficult and requires a special large socket to remove the bolt holding the wheel and assembly together in the middle.
Step 3 Secure the car with jack stands.
Step 1.) I AM UNSURE AT THE MOMENT WHICH COMES FIRST??
Unscrew loosen some, the big bolt in the middle of the wheel with the special socket. and then loosen the wheel lug nuts.
Step 2.) Jack the car up.Unscrew loosen some, the big bolt in the middle of the wheel with the special socket. and then loosen the wheel lug nuts.
Step 3 Secure the car with jack stands.
Step 4.) unscrew loosen some, the big bolt with the special socket.
Step 5.) remove the brake pads and also calipers and secure them with wire. see a manual how to do this correctly.
Step 5.) remove the brake pads and also calipers and secure them with wire. see a manual how to do this correctly.
Step 6.) Remove the brake rotor disc. Now remove the entire hub assembly and replace. put grease on it. use proper torque.
Step 7) Replace everything. Start the car and pump the brakes many times to get them to re-engage properly.