Easy Install with products to use and how to
How To remove door panel
Pioneer 6x9" TS-G690 - 3 way speakers - no adapters used for mounting.
2005 Chevy Cobalt Radio & Speakers Install
THIS IS A LONG AND ELABORATE "HOW TO" THAT YOU CAN 100% COPY KNOWING HOW TO YOURSELF BY THE END WITH MANY PICTURES AND IN DEPTH DESCRIPTIONS. YOU'LL WANT TO SCROLL THROUGH TO THE BOTTOM TO UNDERSTAND WHAT ALL IS HERE FIRST.
Taking off the door panels is easy once you get the door handle off and using a door handle remover helps but there other ways. Taking off the rear panels and deck cover is easy but mildly annoying. Taking off the dash trim is easy with a slim tool. Just need a few screw drivers and socket set basically for the various screw sizes and bolts. A door handle tool or way to get behind it and a trim removal tool. A wire cutter will help with the wiring but may be unnecessary.
1.) Radio Install - with Wiring Harness(s) - and Dash Trim Kit
2.) Front Door Speakers Install - (6x5") - with Adapter
3.) Rear Deck Speakers Install - (6x9")
2.) Front Door Speakers Install - (6x5") - with Adapter
3.) Rear Deck Speakers Install - (6x9")
4.) Other various items and things, how to wire it all up, etc...
5.) Radio Head Unit Review
2005 Chevy Cobalt on 18" rims and might be on Eibach Sportline Springs
This picture shows a cobalt with the dash trim kit installed with the slim black housing for the radio.
There are other versions of the trim I think but not many and you can mount a radio without the trim but have a gap if you had to if the radio comes with a mounting plate bracket. See the 4 screw holes on the sides in the picture above. Either way the radio or the trim screws in there.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
RADIO DASH KIT:
Metra 95-3302 General Motors DDIN 2004 and UP Dash kit
$13.99
Style: Dash kit
Brand Metra
Material High-grade ABS plastic
Item dimensions L x W x H 15.5 x 12 x 2.25 inches
Item Weight 4 ounces
Cable Type auxiliary, RCA, USB
Radio installation kit: The Metra Electronics radio installation kit is designed to facilitate the installation of aftermarket radios into select 1997-2004 Ford and Lincoln vehicles.
Compatibility: The kit is compatible with specific Ford and Lincoln vehicle models, ensuring a proper fit and seamless integration.
Easy installation: The kit includes all the necessary components and instructions for a straightforward installation process.
Durable construction: The kit is made with high-quality materials to ensure long-lasting performance and a professional appearance.
Mounting kit category: The product falls under the category of kits/mounting kits, specifically designed for radio installations.
> There must be an alternative description for Cobalt also maybe on a different website than I found this description, regardless it fits the 2005 sedan.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
RADIO CABLE ADAPTER:
Metra 40-GM10 GM Antenna Adapter [New Improved Version]
$12.83
Antenna Radio
Brand Metra
Number of Channels 2
UPC 827165685305
Manufacturer Metra
Factory Antenna to Aftermarket Radio Adapter
For Select 1988-2006 GM Vehicles
GM factory antenna with mini "barbless" or "barbed" plug to aftermarket radio
GM factory antenna with mini barbedor barbless plug for aftermarket radio
> (Why?)
This is needed for the "radio" (as in the radio antenna - radio stations radio) if your new stereo head unit (radio) doesn't have a similar sized hole to plug the radio cable in the cobalt that is the proper size because the original GM radio wire plug end is slim but a aftermarket radio uses a larger hole so this adapter makes the slim larger to fit so you can listen to the radio stations in your area.
This is needed for the "radio" (as in the radio antenna - radio stations radio) if your new stereo head unit (radio) doesn't have a similar sized hole to plug the radio cable in the cobalt that is the proper size because the original GM radio wire plug end is slim but a aftermarket radio uses a larger hole so this adapter makes the slim larger to fit so you can listen to the radio stations in your area.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
RADIO WIRING HARNESS TO MAINTAIN FACTORY FEATURES:
NOTE: This PAC harness is not the "wiring harness" for the new radio - your purchased radio should come with a "wiring harness." See 2nd picture below for how both fit together.
This product is an "optional" addition to the wiring harness replacement.
PAC C2R-GM11B Radio Replacement Interface for Select 2004-up GM LAN Vehicles with Out OnStar
$84.98
The radio wiring harness and the PAC harness wired together.
The blue PAC harness has a "switch" in it on/off which can "Chime" when the door is open so switch it off or you'll here dual chimes when the door is open.
Style: Interface
Brand PAC
Item dimensions L x W x H 7 x 7.5 x 2.5 inches
Item Weight 0.38 Pounds
Cable Type single
Connector Type Wire Terminal
About this item
Retains all safety warning chimes
Amplifier turn-on output wire, Provides 10-minute RAP accessory output
Single wire output for steering wheel control module
compatible with Chevrolet Cobalt 2005 - 2006, compatible with Chevrolet Malibu 2004 -2007, compatible with Chevrolet Malibu Classic 2008, compatible with Chevrolet Malibu Maxx 2004 - 2007, Pontiac G6 2005 - 2009.
Radio Replacement Interface for Select 2004-up GM LAN 11-Bit Vehicles without OnStar
Plug and play interface
May also be used on vehicles with OnStar if OnStar is not serviced or is unwanted
>(Why?)
You don't "need" this but it makes it so you can leave the radio on when the car is turned off before you open the door. "Allegedly." May depend on your radio not sure? Also other things explained above^
This product is an "optional" addition to the wiring harness replacement and also wires into the replacement wiring harness. If your radio doesn't come with a wiring harness buy 1 or good luck figuring out the wiring for the existing harness if it would even work if there is no plastic adapter to connect the old harness to the new harness as if the back of the new radio just ends with loose wires coming out of its harness that is already plugged in, so you want dual adapters one for the radio to be plugged in and then at the end of that there to be another plug to plug in the stock GM harness that was taken out of the back of your stock radio, and then this PAC harness connects to the new radio harness.
So you would have - adapter - to - adapter - to - adapter - to radio. Or stock radio wires cut off the adapter then spliced into new radio wires which then plugs into the radio plus this PAC harness in between.
Wiring bundles come with color coded wires and a wiring diagram if you buy a radio which also the wires have words on them you may get confused only by the parking brake wire or something like that which you can look up a video to determine which blue or grey or purple wire it is supposed to connect to (if it is supposed to be connected at all) otherwise it is left speaker, right, front back, power, etc... I forget which wasn't made perfectly clear like the rest of them. (Reverse input and antenna input are shown in the picture below all the way at the bottom of this post here, the picture above here has a parking brake interrupt not yet hooked up that allows for video to be played while driving which is an extra purchase on ebay). See next item below.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
RADIO WIRING KIT FOR "BRAKE BYPASS" TO WATCH A DVD WHILE MOVING:
DIYBypass Parking Brake Bypass Fits Boss A B BE BV BI Sony XAV BT SXM Override
$11.95
>(Why?)
Parking brake bypass for radio head unit to play DVD while driving.
This version constantly pings with 3 pulses or something like that and other types ping once or something like that. No idea. Read the description(s) on ebay if it matters. Seems there was a reason when the seller explained it for this type that does 3 pulses. The radio will say you can't play a DVD unless the car is in park and the parking brake is pulled so this makes it so you can.
This is the HOW TO that came with the parking brake bypass interrupt wire.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Front Door Speakers
KENWOOD KFC-1666S Car Stereo Speaker 6-1/2" 2-Way Speakers
$38.90
Brand Kenwood
Speaker Maximum Output Power 300 Watts
Frequency Response 22000 Hz
Audio Output Mode Stereo, Surround
Input Voltage 12 Volts
About this item
Superior Sound Reproduction - Experience immersive audio with KENWOOD Car Stereo Speaker KFC-1666S, featuring 6-1/2" 2-way speakers, delivering impressive clarity and powerful bass.
Enhanced Audio Performance - The polypropylene woofer with treated cloth surround ensures precise and impactful bass response, while the 1" PEI balanced dome tweeter produces crisp and detailed highs
Effortless Installation - Grilles are thoughtfully included, making installation a breeze and providing added protection to the speakers, ensuring a seamless upgrade for your car's audio system
High Power Handling - These speakers handle up to (300 watts peak power), allowing you to turn up the volume without compromising on sound quality
Wide Frequency Range - With a frequency response of 40-22,000 Hz and impedance of 4 ohms, the KFC-1666S covers a broad range of frequencies, delivering a well-balanced audio experience with a sensitivity of 90 dB
Just unscrew the top black screw.
KENWOOD KFC-1666S Car Stereo Speaker 6-1/2" 2-Way Speakers
Scosche SAGMHR634 6.5”-6.75” Speaker Adapters
+plus 4 screws and washers inside I had to purchase explained below.
Stock 2005 Chevy Cobalt front door speaker with stock mount.
Just unscrew the top black screw, it tilts forward and lifts out, has a tab on the bottom.
HOW TO: The front speaker adapter uses the stock black screw located at the top of the adapter seen in the picture. Simply plug in the wiring connector to the back of the speaker and drop it in there is a lip on the bottom that seats in the door then screw in the stock top screw.
The thing here with all those silver screws is to take the plastic Scosche speaker adapter to Home Depot and fit the screws and washers till you find the perfect size which is pretty small since it sits directly behind the screw (or use a nut and bolt combo) in the picture deep down inside the cup shape right up to where the screw is showing in the picture so that screw isn't going any long distance just enough to get behind and pass the washer, then I used a "lock washer" also which looks like a gear with teeth, think it was an outside gear shape not inside they have both types.
All this hardware Home Depot has a row of various similar sizes in bags or loose with like 10 in a bag but you can buy the wrong size which is just slightly too large of a washer that won't seat in the plastic since it shaped like a coffee cup inside you need to get all the way to the bottom of the cup. There are some loose screws and washers under the row of bags or check the drawers at the end of the alley to find the size you need it is small finger nail size. Lowes is basically the same as Home Depot or try Harbor Freight. Also get the wiring connectors.
All this hardware Home Depot has a row of various similar sizes in bags or loose with like 10 in a bag but you can buy the wrong size which is just slightly too large of a washer that won't seat in the plastic since it shaped like a coffee cup inside you need to get all the way to the bottom of the cup. There are some loose screws and washers under the row of bags or check the drawers at the end of the alley to find the size you need it is small finger nail size. Lowes is basically the same as Home Depot or try Harbor Freight. Also get the wiring connectors.
I'll check the receipt (one day) to find out what sizes I used.
The door you unscrew the screws under the door handle cover on the door that you pull to close the door in the middle. You unscrew another screw or 2 around the panel like behind the door latch there is a plastic cover to also pop off then 2 screws there (I think its 2 there). Then on the side of the panel is a small plastic push in clip you need to work it outwards then pull on it, a "paper clip" will help to get it started then I think there is 1 more screw in the side and the rest is just pulling the plastic pokey tabs on the front and bottom and yanking backwards. BUT BE AWARE!
There is a door latch cable you need to disconnect while holding the panel free, (lift it over the door lock push first and raise the panel upwards some get over the door lock) it is a cable inserted into a tiny hole (pain in the ass to reinstall) you pop that up and out then the entire panel is free.
I think? ...There a good YouTube video on it, not so much on the rear deck, but the 1 rear deck I found was good enough to follow. Reinstall of the side panel in the rear is also a pain in the ass. Make note of how you yanked them out so you can do the opposite to pop them back in. The rear deck cover will need to be lifted over and placed on the back of the rear seat which is down forward.
Door latch wire removal to get door panel off, pull up this wire with a post on the end.
The entire plastic latch box remains on the panel and the wire bundle you just removed remains attached to the door inside hanging.
The door latch wire bundle is the top thing wrapped in a paper towel.
other side no paper towel covering the door latch wire.
Same rust problem on both door handles. You can remove it, lift the plastic cover, remove the 2 bolts and de-rust it. Then put the plastic back down no problem, no need for new glue.
Assuming you remove the rust you need to paint it asap or it will rust all over again, especially if you use a rust remover, instead of a wire brush and drill I guess. I used rust remover and it looked good for 1 day but by day 2 it was rusted even worse than before. FYI.
You may want to scour sanding the metal then prime it, so use a drill and disc anyways or sandpaper, so the prime sticks to the metal, then paint it.
> FYI rust remover is highly toxic.<
Bite the bullet and use a drill with a sanding pad which would seemingly also scour the metal in the process so win-win.
Then prime it, paint it.
If you use a water type rust remover you then are smelling it, handling it, need to dispose of it, (put back in jug) or you can paint it on, wash it off, depends the type, etc...
read the warnings says wear a official breathing mask not the slim paper type with some types of rust remover, gloves, ventilated area, etc..
So if doing it with a drill you can remove the rust on the head rests also.
Rear seat head rest rust. Covered up by a plastic cap.
Front door - box
Rear deck - box
more numbers from back of the box
Rear speakers max watts
Front speakers max watts - Kenwood KFC 1666S (6 1/2")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The Front Door Speakers Housing Adapter
Other types of these may exist to purchase from different manufacturers.
I had to go to Home Depot to buy some screws and washers to mount the speakers to this.
Scosche SAGMHR634 6.5”-6.75” Speaker Adapters Compatible with Select 2005-20 GM Vehicles - 6 1/2" to 6 3/4" Adapter Spacer for Car Door Speakers - Sold in Pairs
$11.99
Brand Scosche
Material Acrylonitrile Butadiene Styrene
Item dimensions L x W x H 8.75 x 6.5 x 2 inches
Connector Type 44 Pin Connector
Manufacturer Scosche
About this item
Seamless Integration for GM Vehicles - Scosche SAGMHR634 speaker adapter rings fit perfectly in select 2005-20 GM vehicles, ensuring a snug and secure installation of your aftermarket speakers. See Fit Guide and Notes in images for Vehicle Compatibility
Upgrade Your Audio Experience - Transform your vehicle's audio system effortlessly with the ability to install aftermaket 6.5 to 6.75 inch speakers. Unleash the full potential of your car speakers and enjoy rich, immersive sound that dominates every drive.
Enhanced Speaker Compatibility - Adapt seamlessly to 6.5 or 6.75 inch car door speakers with Scosche adapters. Fits most aftermarket car speakers with a max top mount diameter of 5 5/8" (143mm). See Measurements Image to verify that your speakers will fit.
Easy Installation - No special tools needed when installing SAGMHR634 6.5”-6.75” door speaker spacer rings. Scosche speaker adapters use the existing vehicle mounting points; no cutting or drilling required. Perfect for DIY enthusiasts and professionals.
Durable Construction - Crafted for longevity, Scosche's high-quality speaker adapters promise long-lasting performance. Avoid the frequent issues typical of lesser quality adapters; enjoy peace of mind with reliable, durable support for your new speakers.
Trusted Brand - Backed by Scosche's Limited Lifetime Warranty and Lifetime Tech Support. Scosche, known for its commitment to quality car audio solutions, means you can trust the Scosche SAGMHR634 Speaker Adapters to deliver exceptional performance.
Product Description
Transform your car audio experience with the Scosche SAGMHR634 6.5 - 6.75” Speaker Adapters, designed specifically for select Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac and Saturn vehicles from 2005 to 2020. These speaker adapters are crafted to fit seamlessly into your vehicle's sound system without compromising on sound quality or structural integrity. Whether upgrading to new 6.5" door speakers or integrating a set of powerful 6.75" speakers, these adapters ensure effortless installation and superb sound delivery, making them an essential component for any car audio enthusiast.
Built with compatibility and durability in mind, these adapters hold your speakers securely, preventing vibrations while on the road. They support optimal audio performance, bringing out the best in traditional car speakers. Ideal for those looking to enhance their car's acoustic profile, these adapters fit a variety of GM models and flawlessly work with most car speakers.
Utilizing these speaker adapters, you can effortlessly upgrade from factory sound to a superior car audio experience. Whether you're integrating 2-Way component speakers for an immersive audio journey or simply upgrading your factory coaxial setup, these adapters provide the versatility and strength required for exceptional sound, making them a perfect addition to any vehicle audio upgrade project.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Dorman 76951 Window Handle Removal Tool Universal Fit
$8.99
Ideal for upholstery, glass, stereo, electrical and paint/body jobs
Durable metal construction for a long service life
Universal fit for a broad range of applications
Easy to use
Product Description
Dorman's Window Handle Remover safely and effectively removes the clips that secure manual window handles to inner door panels. Replacement retainer clips are also available for most applications.
You push this tool behind the window crank from the crank side where the little spinning handle is you put your hand on to crank the window, towards the part that is connected to the door, do this to pop off the metal piece in the circle that holds it to the door. You could potentially pop it out with a slim tool and yank on it. It is a little metal piece in a "U" shape that needs to be yanked out like a metal t-shirt hanger in the head hole gets pulled out. Its a thick piece of metal that needs to be popped, pushed out or pulled on. Like with a small screw driver I saw in a video. This tool is single use for removal only you put it flat on the door in the middle of the door and push to get the metal clasp free so the handle falls off. To replace reinstall the metal clasp and push crank on. You need to do it from the middle of the door due to the plastic door curving. You're trying to hit the end pieces of the clasp in the picture above you can see the end a tiny metal silver sliver showing on the top side, this tool rams that out, makes sense when you see the tool picture and know the clasp is a half U shape. Point is to push from the normal spinning handle side all the way under that entire span of plastic to the circle holding it to the door and not from the edge of the edge of the plastic circle. Another way to say it is to "go all the way down the arm" to the elbow.
See YouTube videos how to do it with no tool, here you can see how it is placed before removal so this picture has the clasp reinstalled. If using a paper clip which is what it looks like in the picture plan on bending two of them it is "snapped" in there tight.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
REAR SPEAKERS + (REAR SPEAKERS THAT DIDN'T FIT)
Rear Speakers - Pioneer TS-G690 - 6x9" - These fit the 2005 cobalt sedan with no adapters.
$59.99
THE REAR DECK SPEAKERS
The front door speakers are 6.5" (other size can fit depending on how) and the rear speakers are 6x9" but you need to get rear speakers that properly fit in the hole which is a "shallow" hole straight through to the trunk and not "deep" or "wide" hole (see picture) so you could buy 6x9 speakers try to install them and find that the rear "metal frame" of the speaker will not fit (the back side with the magnet) that entire width and depth of the metal speaker frame won't allow it to seat in the hole, the speaker hangs freely in the trunk. You can access and disconnect the wires for it from the trunk or just lift it up during removal. The metal frame is the issue with some speakers having adapters used I saw at least 1 cobalt with a 6x9 adapter used. Not sure how seems it would need to be smaller 6x9 or would seat higher?
Rear Speakers Pioneer TS-G690 (6x9")
no adapter housing needed just screw it in
I didn't use the covers
left side cobalt sedan speaker hole
Metra 72-4568 Speaker Connector Adapter plugged into original GM wire clip
Rear deck cover.
How To access the rear speakers, see image above.
Stock speaker, new speaker, didn't install any covers for any speakers front or rear.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The rear speakers are 6x9"
FOR EXAMPLE DO NOT BUY THESE 6X9 FOR THE REAR!!!
Kenwood KFC-6966S 6 x 9 Inch 400-Watt 3-Way Flush Mount Coaxial Car Speaker Easy Installation - Pair
$55.75
DO NOT BUY THESE -
the metal frame is to deep to seat in the rear. Maybe with a adapter but alone they don't seat properly.
Kenwood KFC-6966S 6 x 9 - didn't fit flat was unable to seat in a 2005 Chevrolet Cobalt sedan
Style: 6"X9" 3-Way Speakers
Brand Kenwood
Speaker Maximum Output Power 400 Watts
Frequency Response 3520000 Hz
Connectivity Technology wired
Audio Output Mode Stereo
400 watt peak power handling 6x9 For strong bass performance
Polypropelene cone for long last performance
Speaker dimensions for front and both types of rear speakers, the pioneer that fit and kenwood that didn't.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Metra 72-4568 Speaker Connector Adapter for Select 1984-2013 GM Vehicles (pair)
$9.95
You "need" 4 of these total one for each speaker - unless you cut the wires - when removing the stock speakers these make it a quick plug and play swap. Install the red connector on the speaker then plug in the existing GM wire connector to these. You can install the rear speakers and not have these then just pop the trunk and install later if they do not arrive in time as the bottom of the speaker is accessible from the trunk space to do this.
End result is a short cable with an adapter that clips into the old GM wire thing easy.
Otherwise save a couple bucks and cut the old GM wire thing off the wires and figure out a way to wire it to your speaker. You'd still likely need the red thing, which would come bundled with your new speakers.
Speaker wiring option with and without the adapter.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Then some form of head unit - radio - you can find a lot on Amazon for $100 or Crutchfield.com
Some have CD, DVD players, some have aux cable connection, usb connection, and rear camera support. Some are still around that are not touch screen and are half as thick like old radios. Some have slide out displays with a screen that can be hidden when not being used.
$50 to $75 to $100+ up to $1000
example radio image - not sure fits cobalt but "Boss" does have a unit that fits.
The blue block is the default radio wire bundle and the black wire on the right is the stock radio cable that will plug into the adapter.
You can use a variety of brands that are shorter or have no bend it doesn't matter this is actually a long cable and you can buy just a plug head so the default stock wire can be moved all over is long enough already so this adds some debris to the giant junk pile of wires this install is.
Its that radio wire on the right above that plugs into this then this into the radio.
Install complete! Plug in radio cable & plug in wiring harness.
Wait for strange rattles....
This radio wire and way the wires and connected with the twists may become a issue if you are plugging more things in like back up camera cables and other TV or amp wiring, etc...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
OTHER TOOLS AND THINGS:
Wire Screw Caps Terminals Kit 5 Sizes Electrical Assortment Spring Thread Insulated Twist on Connectors for 22-12 AWG Wires
$10.00
There are all kinds of ways to connect wires this is 1 low effort way just put the wires in and twist.
wire stripper
$10.00
Dash Trim Remover Tools (made of plastic)
$10.00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Some Install Pictures
Radio wiring harness plus the
PAC Radio Replacement Interface
Use the holes in a wire cutter tool to slide off the ends of the wires
since they are already pre-clipped at the end then twist them together.
You need to watch a few videos on how to remove the dash trim, how to remove the front door, and how to remove the rear deck, which includes having to take off the rear plastic cover panels on the top left and right by the rear window and the rear plastic next to the rear seat between the seat and door, plus the head rests so you can lift the rear deck cover up, but it remains in the back on the rear seats folded down because the seat belts keep it from being removed entirely.
Other than all the pulling off plastic panels everywhere it is just a few screws for the speakers and radio.
Stock 2005 chevy cobalt radio
Playing DVD
Boss Elite BV755B
there are a couple versions of this radio with backup camera or not and other variety
you can check Amazon or the Boss website.
BOSS Audio Systems Elite BV755B Car Stereo System - 6.2 Inch Double Din Touchscreen, Bluetooth Head Unit, AM/FM Radio Receiver, CD Player, USB, SD, Aux In, Hook Up To Amplifier
$79.99
Brand BOSS Audio Systems
Connectivity Technology Bluetooth, USB
Controller Type iOS, Android
Special Feature Touchscreen, Pandora, Equalizer
Compatible Devices Smartphone, Speaker
Connector Type USB, 3.5mm Jack
Audio Output Mode Stereo
Color Double Din 6.2 Inch
Output Power 5E+1 Watts
Wattage 8E+1
See more
About this item
Push To Talk - Connect to your Smartphone’s Android and IOS assistant with a push of a button via Bluetooth. This unit Lets you access information, accept commands, and keep driving
Screen Mirroring - BOSS Audio Systems A-LINK technology allows your Android 8 + screen to be duplicated on the receiver’s larger screen. A-LINK enables you to clearly see your already familiar navigation, Music, Movies and Apps on a much bigger scale
Bluetooth - Answer / make calls and be hands-free with no distractions. The built-in microphone picks up your voice and the speakers let you hear the caller. You can also play and control your music and apps like Spotify / Pandora wirelessly
Auxiliary - Compatible with the audio output from smartphones as well as MP3 players
Media Playback - Watch your choice of videos through the DVD player, play music through your Bluetooth device, pop in a CD or use the USB and SD ports for more audio alternatives. Tune into the AM / FM radio stations for up to date music/news/sports
Inputs - USB, SD, AUX, front and rearview camera (camera sold separately). The steering wheel interface allows you to use the existing functions on your steering wheel (interface module sold separately. We recommend the Metra ASWC-1)
Outputs - Use the front, rear & subwoofer pre-amp outputs to hook up your speakers (front left / front right and rear left / rear right) and subwoofer. The video outputs allow you to connect extra screens for more viewing capability
My remote is differently shaped and has rubber buttons. Like the one in the picture with the box.
Talking through your cell phone via the radio is picked up by the radio microphone but it is very low volume to the person listening.
Seems that my battery is now not wanting to start the car easily has to crank over many times or maybe the alternator has too much drain on it from the added tech here.
radio, pac, brake interruptor may need to be wired with a diod but the seller said not with this radio, might be draining my battery.
Note nothing is hard wired so the radio wiring can just be disconnected from the stock harness to the new wiring harness adapter and then reinstall the old radio.
The stock radio will not power the speakers well without any amp but should "work."
Not all the aftermarket wiring wires were connected and there is a black plug also
not sure what plugs in it, boss manual likely explains. Camera? Has a camera wire also.
For dash cam and reverse cam.
If you read up on dash cam wiring that is an entire thing of its own to read up on needing to splice all kinds of wires just in general to do it to give it power and connect the video to radio, this radio will also do backup camera in reverse and maybe show it while driving.
https://www.youtube.com/watch?v=olhrPau4AIA
REVIEW OF RADIO HERE: Boss Elite BV755B
Here is a link to a review here in another post of this radio
This is the version that includes the reverse camera for the license plate plus that yellow cable for it.
Apparently it looks like this from an Amazon review picture.
Boss Elite BV755B - the box I got - no camera
Might install an amp next to improve the speakers sound if they are under powered and add a bass tube.
Overall now the sound is just "normal" car speakers.